- PMI Calibration Procedures
- PMI-0001-390 Rev.B ─ Outside Micrometer
- PMI-0002-390 Rev.D ─ Calipers
- PMI-0003-390 Rev.G ─ Torque Wrenches, watches and Drivers
- PMI-0004-390 Rev.B ─ Test Indicators
- PMI-0005-390 Rev.C ─ Drop Indicators/Thickness Gages
- PMI-0006-390 Rev.C ─ Crimp Tools
- PMI-0007-390 Rev.B ─ Depth Micrometers
- PMI-0008A-390 Rev.B ─ Height Gages
- PMI-0009-390 Rev.B ─ Sine Plate and Sine Bars
- PMI-0010-390 Rev.A ─ Pin Gages
- PMI-0011-390 Rev.C ─ Pressure Gages, Indicators and Transmitters
- PMI-0012-390 Rev.B ─ Pressure Gages (Oil)
- PMI-0013-390 Rev.B ─ Knees, Parallel and Squares
- PMI-0014-390 Rev.A ─ Load Cells and Strain Gages
- PMI-0015-390 Rev.B ─ Magnehelic Gages, Differential Pressure Indicators and Transmitters
- PMI-0016-390 Rev.B ─ Balances and Scales
- PMI-0017-390 Rev.B ─ Chamber Temperature Profile
- PMI-0018-390 Rev.A ─ Sterilizer, AMSCO 2000
- PMI-0019-390 Rev.A ─ Force Gages
- PMI-0020-390 Rev.E ─ Liquid Glass Thermometers, TC's, RTD's, and Temperature Transmitters
- PMI-0021-390 Rev.A ─ Setric Genie RPM Indicator
- PMI-0026-390 Rev.B ─ Optical Comparator
- PMI-0027-390 Rev.B ─ Measuring Microscope
- PMI-0028-390 Rev.A ─ Thickness/Feeler Gages
- PMI-0029-390 Rev.C ─ Steel Rulers
- PMI-0030-390 Rev.A ─ Profilometers
- PMI-0031-390 Rev B ─ Radius Gages
- PMI-0032-390 Rev.A ─ Hardness Testers
- PMI-0033-390 Rev.A ─ Inside Micrometers
- PMI-0034-390 Rev.A ─ Mic Standards and End Rods
- PMI-0035-390 Rev.B ─ Blade Micrometers
- PMI-0036-390 Rev.A ─ Pin Micrometers
- PMI-0037-390 Rev.A ─ V-Anvil Micrometers
- PMI-0038-390 Rev.B ─ Coordinate Measuring Machine
- PMI-0043-1293 Rev.D ─ Temperature Measurement Calibration
- PMI-0046-390 Rev.B ─ Height Masters
- PMI-0048-390 Rev.A ─ Vacuum Gauges
- PMI-0049-0693 Rev.C ─ pH Meters
- PMI-0050-195 Rev.C ─ Tachometers
- PMI-0051-0195 Rev.B ─ Digital Temperature Indicators
- PMI-0052-0702 ─ Flow Controllers
- PMI-0053-795 Rev.E ─ Pipettes, Semi-Automated Cal
- PMI-0055-197 Rev.B ─ Centrifuges
- PMI-0056-197 Rev.A ─ Spectrophotometers
- PMI-0057-297 Rev.A ─ Conductivity and Resistivity Meters
- PMI-0058-297 Rev.A ─ Lyophilizers (Vacuum Display)
- PMI-0059-0797 Rev.C ─ Relative Humidity
- PMI-0060-0797 Rev.E ─ Line Speed, Footage Counter, Laminator
- PMI-0061-0797 Rev.B ─ Timers
- PMI-0062-897 Rev.B ─ mV Chart Recorders
- PMI-0063-1297 Rev.C ─ General Purpose Power Supplies
- PMI-0067-499 ─ Calibration of Analog and Digital Displays
- PMI-0067-0700 ─ Calibration of Torque Analyzer/Testers
- PMI-0068-1299 Rev.A ─ Calibration of Oscilloscope Probes
- PMI-0069-0799 Rev.A ─ Performance Verification of Power Sensors
- PMI-0070-1005 Rev.A ─ Servicing Microscopes
- PMI-0073-0901 Rev.A ─ Ortho-McNeil 20sq cm Dies
- PMI-0074-602 Rev.A ─ Weight
- PMI-0075-602 ─ Level
- PMI-0076-702 ─ Force Test Stand
- PMI-0077-802 Rev.A ─ Video XYZ Coordinate Machine/Toolmaker's Microscope
- PMI-0078-1102 ─ Gage Blocks
- PMI-0079-1102 ─ Plain Ring Gages
- PMI-0080-1102 ─ Protractor
- PMI-0081-303 ─ Glass Scale
- PMI-0082-303 ─ Angle Gage
- PMI-0083-503 ─ Supply Airflow for Hirano
- PMI-0084-1003 ─ Hirano Circulation Fan Controller
- PMI-0085-0204 ─ Air Flow Meter
- PMI-0086-0304 ─ Temperature Baths
- PMI-0087-0504 ─ Proximity Displacement Gage Calibration
- PMI-0092-0305 ─ Telecommunications and Protocol Analyzer Procedure
- PMI-0093-0805 ─ Determination of Thermocouple Uncertainty
- PMI-0094-1107 ─ Laser Micrometer
- PMI-0095-1107 ─ Verification of Power Sensor w/Connector Gaging
- PMI-0096-108 Rev.A ─ Transducer w/out a Display
- PMI-0097-608 Rev.A ─ Tapped Hole Location Gages
- PMI-0098-808 Rev.B ─ Hot Wire Anemometer/Turbo Meter
- PMI-0099-908 Rev.B ─ Laser Power Measurement
- PMI-0100-0609 ─ Plate Readers
- PMI-0101-1214 Rev.A ─ Ground Bond Tester
- PMI-0102-1214 Rev.A ─ Hipot and Withstand Testers
- PMI-0103-0316 Rev.B ─ Helmut Klien 4500 Timometer
- PMI-0104-0816 Rev.A ─ Uninterrupted Power Supply (UPS)
